DeutschEnglishTeLC A. Kutschelis unnd Sohn, Dipl.-Ingenieure
 
Home
Company
Products
Mechatronics
Automotive
Metal technologies
Tool dynamometer drilling
Tool dynamometer turning
Tool dynamometer milling
Tool dynamometer details
XKM-Software
Temp. measurement on tool
Screw-dynamometer
Material test machine
Material test press
Upgrades
Material test soft
Hydrodynamic bearing
Sensors
Ballspindle
Automatic control
Heating
Airconditioning
Supply technique
Regenerative energies
Compressors / Pumps
Fluidized bed dryer
Downloads
Printable catalog
Novelties
Newsletter
Hobby
Contact Germany
Contact international
Location
Imprint
19:20 / 24.02.2018
printable version Tool dynamometer turning DKM 2010
 
Tool dynamometer turning
DKM2010
 

NEW 5- Components Dynamometer for measurement of cutting forces and tool tip temperature in turning processes

 
DKM2010 is now a 5-Components Tool Dynamometer, It measures
  • Fc = main cutting force
  • FfL = feed force to the right
  • FfR = feed force to the left
  • Fp = passive force +
  • Fp = passive force – (drawing into workpiece)
 
It is as small as the former type A, but measures forces up to 2000 N

With help of the adjustable inserts holder for indexable inserts ISO type CCM..9 approach angles of 45 60 75 90° are easily adjusted.

With USB interface data acquisition rate now can be adjusted up to 100 SPS .

The measured values can be read on the internal display using auto-hold. The PC-based data acquisition is performed over the built-in USB interface with our included software for tool dynamometers. Over the same interface the device parameter setup for wear detection is executed. After the setup, the device is able to supervise a turning process without a connected PC. Also available is a temperature measurement of the tool tip, which is fully integrated in the device. With this great properties the device suits multiple educational and industrial applications.

 

Downloads:

 

Measuring systems :

Strain gage sensors with very small deflection, range 2000N, resolution 1 N, data acquisition rate adjustable 5 – 100 SPS

 

Clamping; Adjustable inserts holder :

Thanks to the bars left and right side of the body the DKM2010 can be clamped in every turret on the lathe and be operated in longitudinal or cross feed on konventional or CNC lathes. The bars are 12 mm high.
Variation of the tool geometry is realized by means of the
4-step adjustable inserts holder 45,60,75,90° and indexable inserts ISO type CCM..9.

 

Experiments:

The following experiments are possible:

  • Examination of the influence of the cutting geometry, material, lubricant coolant and machine settings
  • Investigation of the optimal parameters for a turning process regarding power consumption and tool wear.
Keywords: Cutting tool dynamometer, Cutting dynamometer, Tool dynamometer, cutting thrust meter, wear detection, break detection, tool monitoring, Turning, Borehole, Power, Force, Feed, Cut, Cutting, Burr, Temperature, Torque, Reduction of wear and tear, wear out
 
©TeLC Unna 2004