TeLC.de

This six component dynamometer measures the cutting forces in any milling process. It is an improved version based on a principle existing since 1982. The measured values can be read on a large external display using auto-hold. The PC-based data acquisition is performed over the built-in USB interface with our included software for tool dynamometers. With this great properties the device suits for multiple educational and industrial applications.

Downloads:

Multimedia produkt-presentation

Measuring range:

3-axes measurement: Fx, Fy, Fz = +/- 3000 N

Experiments:

The milling processes's cutting forces are measured on the workpiece. The workpiece is clamped in the dynamometer like in a vice. The device itself is bolted onto the machine's table. The workpiece can be processed with all kinds of milling and grinding (!) tools. The device is protected against liquids. The following experiments are possible:

Examination of the influence of the cutting geometry, material, lubricant cooling and machine settings
Investigation of the optimum parameters of a milling process

Dimensions:

Size (w x d x h): 300mm x 160mm x 100mm (12" x 16.3" x 3.9")
Workpiece: 70mm x 70mm x 90mm, (2,8" x 2,8 x 3,6")
processable down to 40mm x 40mm x 70mm (1,6" x 1,6" x 2,8")
Weight: 18 kg (39.6 pounds)

Keywords: Tool Dynamometer, Cutting tool dynamometer, Cutting dynamometer, cutting thrust meter, wear detection, break detection, tool monitoring, Milling, Millerr, Power, Force, Feed, Cut, Cutting, Burr, Temperature, Torque, Reduction of wear and tear, wear out